Setting Up 2
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 49
3 Test some commands on the instrument:
a Right-click on the instrument and choose Send Commands To This Instrument
from the popup menu.
b In the Keysight Interactive IO application, enter commands in the Command
field and press Send Command, Read Response, or Send&Read.
c Choose Connect>Exit from the menu to exit the Keysight Interactive IO
application.
4 In the Keysight Connection Expert application, choose File>Exit from the menu
to exit the application.
To Next Page
Loading...
