Keysight Technologies InfiniiVision 3000T X Series - Page 133

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 133
:SBUS<n>:UART:TRIGger
:DATA <value> (see
page 883)
:SBUS<n>:UART:TRIGger
:DATA? (see page 883)
<value> ::= 8-bit integer from
0-255 (0x00-0xff) in decimal,
<hexadecimal>, <binary>, or
<quoted_string> format
<hexadecimal> ::= #Hnn where n
::= {0,..,9 | A,..,F} for
hexadecimal
<binary> ::= #Bnn...n where n ::=
{0 | 1} for binary
<quoted_string> ::= any of the
128 valid 7-bit ASCII characters
(or standard abbreviations)
:SBUS<n>:UART:TRIGger
:IDLE <time_value>
(see page 884)
:SBUS<n>:UART:TRIGger
:IDLE? (see page 884)
<time_value> ::= time from 1 us
to 10 s in NR3 format
:SBUS<n>:UART:TRIGger
:QUALifier <value>
(see page 885)
:SBUS<n>:UART:TRIGger
:QUALifier? (see
page 885)
<value> ::= {EQUal | NOTequal |
GREaterthan | LESSthan}
:SBUS<n>:UART:TRIGger
:TYPE <value> (see
page 886)
:SBUS<n>:UART:TRIGger
:TYPE? (see page 886)
<value> ::= {RSTArt | RSTOp |
RDATa | RD1 | RD0 | RDX |
PARityerror | TSTArt | TSTOp |
TDATa | TD1 | TD0 | TDX}
:SBUS<n>:UART:WIDTh
<width> (see page 887)
:SBUS<n>:UART:WIDTh?
(see page 887)
<width> ::= {5 | 6 | 7 | 8 | 9}
Table 35 :SBUS<n>:UART Commands Summary (continued)
Command Query Options and Query Returns
Table 36 General :SEARch Commands Summary
Command Query Options and Query Returns
n/a :SEARch:COUNt? (see
page 891)
<count> ::= an integer count
value
:SEARch:EVENt
<event_number> (see
page 892)
:SEARch:EVENt? (see
page 892)
<event_number> ::= the integer
number of a found search event
:SEARch:MODE <value>
(see page 893)
:SEARch:MODE? (see
page 893)
<value> ::= {EDGE | GLITch | RUNT
| TRANsition | SERial{1 | 2} |
PEAK}
:SEARch:STATe <value>
(see page 894)
:SEARch:STATe? (see
page 894)
<value> ::= {{0 | OFF} | {1 |
ON}}