Keysight Technologies InfiniiVision 3000T X Series - Page 142

142 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
Table 51 :SEARch:SERial:UART Commands Summary
Command Query Options and Query Returns
:SEARch:SERial:UART:D
ATA <value> (see
page 975)
:SEARch:SERial:UART:D
ATA? (see page 975)
<value> ::= 8-bit integer from
0-255 (0x00-0xff) in decimal,
<hexadecimal>, <binary>, or
<quoted_string> format
<hexadecimal> ::= #Hnn where n
::= {0,..,9| A,..,F} for
hexadecimal
<binary> ::= #Bnn...n where n ::=
{0 | 1} for binary
<quoted_string> ::= any of the
128 valid 7-bit ASCII characters
(or standard abbreviations)
:SEARch:SERial:UART:M
ODE <value> (see
page 976)
:SEARch:SERial:UART:M
ODE? (see page 976)
<value> ::= {RDATa | RD1 | RD0 |
RDX | TDATa | TD1 | TD0 | TDX |
PARityerror | AERRor}
:SEARch:SERial:UART:Q
UALifier <value> (see
page 977)
:SEARch:SERial:UART:Q
UALifier? (see
page 977)
<value> ::= {EQUal | NOTequal |
GREaterthan | LESSthan}
Table 52 :SYSTem Commands Summary
Command Query Options and Query Returns
:SYSTem:DATE <date>
(see page 981)
:SYSTem:DATE? (see
page 981)
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1
format
<month> ::= {1,..,12 | JANuary |
FEBruary | MARch | APRil | MAY |
JUNe | JULy | AUGust | SEPtember
| OCTober | NOVember | DECember}
<day> ::= {1,..31}
:SYSTem:DSP <string>
(see page 982)
n/a <string> ::= up to 75 characters
as a quoted ASCII string
n/a :SYSTem:ERRor? (see
page 983)
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 1233).
:SYSTem:LOCK <value>
(see page 984)
:SYSTem:LOCK? (see
page 984)
<value> ::= {{1 | ON} | {0 |
OFF}}