Keysight Technologies InfiniiVision 3000T X Series - Page 143

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 143
:SYSTem:PERSona[:MANu
facturer]
<manufacturer_string>
(see page 985)
:SYSTem:PERSona[:MANu
facturer]? (see
page 985)
<manufacturer_string> ::= quoted
ASCII string, up to 63 characters
:SYSTem:PERSona[:MANu
facturer]:DEFault
(see page 986)
n/a Sets manufacturer string to
"KEYSIGHT TECHNOLOGIES"
:SYSTem:PRESet (see
page 987)
n/a See :SYSTem:PRESet (see page 987)
:SYSTem:PROTection:LO
CK <value> (see
page 990)
:SYSTem:PROTection:LO
CK? (see page 990)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:SETup
<setup_data> (see
page 991)
:SYSTem:SETup? (see
page 991)
<setup_data> ::= data in IEEE
488.2 # format.
:SYSTem:TIME <time>
(see page 993)
:SYSTem:TIME? (see
page 993)
<time> ::= hours,minutes,seconds
in NR1 format
:SYSTem:TOUCh {{1 |
ON} | {0 | OFF}} (see
page 994)
:SYSTem:TOUCh? (see
page 994)
{1 | 0}
Table 52 :SYSTem Commands Summary (continued)
Command Query Options and Query Returns
Table 53 :TIMebase Commands Summary
Command Query Options and Query Returns
:TIMebase:MODE
<value> (see page 997)
:TIMebase:MODE? (see
page 997)
<value> ::= {MAIN | WINDow | XY |
ROLL}
:TIMebase:POSition
<pos> (see page 998)
:TIMebase:POSition?
(see page 998)
<pos> ::= time from the trigger
event to the display reference
point in NR3 format
:TIMebase:RANGe
<range_value> (see
page 999)
:TIMebase:RANGe? (see
page 999)
<range_value> ::= time for 10 div
in seconds in NR3 format
:TIMebase:REFerence
{LEFT | CENTer |
RIGHt} (see page 1000)
:TIMebase:REFerence?
(see page 1000)
<return_value> ::= {LEFT | CENTer
| RIGHt}
:TIMebase:SCALe
<scale_value> (see
page 1001)
:TIMebase:SCALe? (see
page 1001)
<scale_value> ::= time/div in
seconds in NR3 format