Keysight Technologies InfiniiVision 3000T X Series - Page 146

146 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:TRIGger:DELay:TRIGge
r:SLOPe <slope> (see
page 1024)
:TRIGger:DELay:TRIGge
r:SLOPe? (see
page 1024)
<slope> ::= {NEGative | POSitive}
:TRIGger:DELay:TRIGge
r:SOURce <source>
(see page 1025)
:TRIGger:DELay:TRIGge
r:SOURce? (see
page 1025)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
Table 55 :TRIGger:DELay Commands Summary (continued)
Command Query Options and Query Returns
Table 56 :TRIGger:EBURst Commands Summary
Command Query Options and Query Returns
:TRIGger:EBURst:COUNt
<count> (see
page 1027)
:TRIGger:EBURst:COUNt
? (see page 1027)
<count> ::= integer in NR1 format
:TRIGger:EBURst:IDLE
<time_value> (see
page 1028)
:TRIGger:EBURst:IDLE?
(see page 1028)
<time_value> ::= time in seconds
in NR3 format
:TRIGger:EBURst:SLOPe
<slope> (see
page 1029)
:TRIGger:EBURst:SLOPe
? (see page 1029)
<slope> ::= {NEGative | POSitive}
:TRIGger:EBURst:SOURc
e <source> (see
page 1030)
:TRIGger:EBURst:SOURc
e? (see page 1030)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format