Keysight Technologies InfiniiVision 3000T X Series - Page 159

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 159
:WGEN<w>:OUTPut:LOAD
<impedance> (see
page 1157)
:WGEN<w>:OUTPut:LOAD?
(see page 1157)
<impedance> ::= {ONEMeg | FIFTy}
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:OUTPut:POLar
ity <polarity> (see
page 1158)
:WGEN<w>:OUTPut:POLar
ity? (see page 1158)
<polarity> ::= {NORMal |
INVerted}
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:PERiod
<period> (see
page 1159)
:WGEN<w>:PERiod? (see
page 1159)
<period> ::= period in seconds in
NR3 format
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:RST (see
page 1160)
n/a <w> ::= 1 or 2 in NR1 format
:WGEN<w>:VOLTage
<amplitude> (see
page 1161)
:WGEN<w>:VOLTage?
(see page 1161)
<amplitude> ::= amplitude in
volts in NR3 format
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:VOLTage:HIGH
<high> (see page 1162)
:WGEN<w>:VOLTage:HIGH
? (see page 1162)
<high> ::= high-level voltage in
volts, in NR3 format
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:VOLTage:LOW
<low> (see page 1163)
:WGEN<w>:VOLTage:LOW?
(see page 1163)
<low> ::= low-level voltage in
volts, in NR3 format
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:VOLTage:OFFS
et <offset> (see
page 1164)
:WGEN<w>:VOLTage:OFFS
et? (see page 1164)
<offset> ::= offset in volts in
NR3 format
<w> ::= 1 or 2 in NR1 format
Table 67 :WGEN<w> Commands Summary (continued)
Command Query Options and Query Returns
Table 68 :WMEMory<r> Commands Summary
Command Query Options and Query Returns
:WMEMory<r>:CLEar
(see page 1167)
n/a <r> ::= 1 to (# ref waveforms) in
NR1 format
:WMEMory<r>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 1168)
:WMEMory<r>:DISPlay?
(see page 1168)
<r> ::= 1 to (# ref waveforms) in
NR1 format
{0 | 1}
:WMEMory<r>:LABel
<string> (see
page 1169)
:WMEMory<r>:LABel?
(see page 1169)
<r> ::= 1 to (# ref waveforms) in
NR1 format
<string> ::= any series of 10 or
less ASCII characters enclosed in
quotation marks