Keysight Technologies InfiniiVision 3000T X Series - Page 160

160 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:WMEMory<r>:SAVE
<source> (see
page 1170)
n/a <r> ::= 1 to (# ref waveforms) in
NR1 format
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
NOTE: Only ADD or SUBtract math
operations can be saved as
reference waveforms.
:WMEMory<r>:SKEW
<skew> (see page 1171)
:WMEMory<r>:SKEW?
(see page 1171)
<r> ::= 1 to (# ref waveforms) in
NR1 format
<skew> ::= time in seconds in NR3
format
:WMEMory<r>:YOFFset
<offset>[suffix] (see
page 1172)
:WMEMory<r>:YOFFset?
(see page 1172)
<r> ::= 1 to (# ref waveforms) in
NR1 format
<offset> ::= vertical offset
value in NR3 format
[suffix] ::= {V | mV}
:WMEMory<r>:YRANge
<range>[suffix] (see
page 1173)
:WMEMory<r>:YRANge?
(see page 1173)
<r> ::= 1 to (# ref waveforms) in
NR1 format
<range> ::= vertical full-scale
range value in NR3 format
[suffix] ::= {V | mV}
:WMEMory<r>:YSCale
<scale>[suffix] (see
page 1174)
:WMEMory<r>:YSCale?
(see page 1174)
<r> ::= 1 to (# ref waveforms) in
NR1 format
<scale> ::= vertical units per
division value in NR3 format
[suffix] ::= {V | mV}
Table 68 :WMEMory<r> Commands Summary (continued)
Command Query Options and Query Returns