Keysight Technologies InfiniiVision 3000T X Series - Page 75

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 75
n/a :ACQuire:SRATe? (see
page 242)
<sample_rate> ::= sample rate
(samples/s) in NR3 format
:ACQuire:TYPE <type>
(see page 243)
:ACQuire:TYPE? (see
page 243)
<type> ::= {NORMal | AVERage |
HRESolution | PEAK}
Table 4 :ACQuire Commands Summary (continued)
Command Query Options and Query Returns
Table 5 :BUS<n> Commands Summary
Command Query Options and Query Returns
:BUS<n>:BIT<m> {{0 |
OFF} | {1 | ON}} (see
page 247)
:BUS<n>:BIT<m>? (see
page 247)
{0 | 1}
<n> ::= 1 or 2; an integer in NR1
format
<m> ::= 0-15; an integer in NR1
format
:BUS<n>:BITS
<channel_list>, {{0 |
OFF} | {1 | ON}} (see
page 248)
:BUS<n>:BITS? (see
page 248)
<channel_list>, {0 | 1}
<channel_list> ::= (@<m>,<m>:<m>
...) where "," is separator and
":" is range
<n> ::= 1 or 2; an integer in NR1
format
<m> ::= 0-15; an integer in NR1
format
:BUS<n>:CLEar (see
page 250)
n/a <n> ::= 1 or 2; an integer in NR1
format
:BUS<n>:DISPlay {{0 |
OFF} | {1 | ON}} (see
page 251)
:BUS<n>:DISPlay? (see
page 251)
{0 | 1}
<n> ::= 1 or 2; an integer in NR1
format