Keysight Technologies InfiniiVision 3000T X Series - Page 76

76 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:BUS<n>:LABel
<string> (see
page 252)
:BUS<n>:LABel? (see
page 252)
<string> ::= quoted ASCII string
up to 10 characters
<n> ::= 1 or 2; an integer in NR1
format
:BUS<n>:MASK <mask>
(see page 253)
:BUS<n>:MASK? (see
page 253)
<mask> ::= 32-bit integer in
decimal, <nondecimal>, or
<string>
<nondecimal> ::= #Hnn...n where n
::= {0,..,9 | A,..,F} for
hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F} for
hexadecimal
<n> ::= 1 or 2; an integer in NR1
format
Table 5 :BUS<n> Commands Summary (continued)
Command Query Options and Query Returns
Table 6 :CALibrate Commands Summary
Command Query Options and Query Returns
n/a :CALibrate:DATE? (see
page 257)
<return value> ::=
<year>,<month>,<day>; all in NR1
format
:CALibrate:LABel
<string> (see
page 258)
:CALibrate:LABel?
(see page 258)
<string> ::= quoted ASCII string
up to 32 characters
:CALibrate:OUTPut
<signal> (see
page 259)
:CALibrate:OUTPut?
(see page 259)
<signal> ::= {TRIGgers | MASK |
WAVEgen | WGEN1 | WGEN2}
Note: WAVE and WGEN1 are
equivalent.
Note: WGEN2 only available on
models with 2 WaveGen outputs.
n/a :CALibrate:PROTected?
(see page 260)
{PROTected | UNPRotected}
:CALibrate:STARt (see
page 261)
n/a n/a