Keysight Technologies InfiniiVision 3000T X Series - Page 83

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 83
:DVM:MODE <mode> (see
page 337)
:DVM:MODE? (see
page 337)
<dvm_mode> ::= {ACRMs | DC |
DCRMs}
:DVM:SOURce <source>
(see page 338)
:DVM:SOURce? (see
page 338)
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format
Table 12 :DVM Commands Summary (continued)
Command Query Options and Query Returns
Table 13 :EXTernal Trigger Commands Summary
Command Query Options and Query Returns
:EXTernal:BWLimit
<bwlimit> (see
page 340)
:EXTernal:BWLimit?
(see page 340)
<bwlimit> ::= {0 | OFF}
:EXTernal:PROBe
<attenuation> (see
page 341)
:EXTernal:PROBe? (see
page 341)
<attenuation> ::= probe
attenuation ratio in NR3 format
:EXTernal:RANGe
<range>[<suffix>]
(see page 342)
:EXTernal:RANGe? (see
page 342)
<range> ::= vertical full-scale
range value in NR3 format
<suffix> ::= {V | mV}
:EXTernal:UNITs
<units> (see page 343)
:EXTernal:UNITs? (see
page 343)
<units> ::= {VOLT | AMPere}
Table 14 :FFT Commands Summary
Command Query Options and Query Returns
:FFT:AVERage:COUNt
<count> (see page 347)
:FFT:AVERage:COUNt?
(see page 347)
<count> ::= an integer from 2 to
65536 in NR1 format.
:FFT:CENTer
<frequency> (see
page 348)
:FFT:CENTer? (see
page 348)
<frequency> ::= the current
center frequency in NR3 format.
The range of legal values is from
0 Hz to 25 GHz.
:FFT:CLEar (see
page 349)
n/a n/a
:FFT:DISPlay {{0 |
OFF} | {1 | ON}} (see
page 350)
:FFT:DISPlay? (see
page 350)
<s> ::= 1-6, in NR1 format.
{0 | 1}
:FFT:DMODe
<display_mode> (see
page 351)
:FFT:DMODe? (see
page 351)
<display_mode> ::= {NORMal |
AVERage | MAXHold | MINHold}
:FFT:OFFSet <offset>
(see page 353)
:FFT:OFFSet? (see
page 353)
<offset> ::= the value at center
screen in NR3 format.