What's New 1
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 37
Changed
Commands
:SBUS<n>:CAN:TRIGger:PATTer
n:DATA:STARt (see page 742)
Specifies the starting byte position for CAN FD data triggers.
:SBUS<n>:SENT Commands
(see page 817)
Commands for using the SENT triggering and serial decode
feature.
:SEARch:SERial:SENT
Commands (see page 965)
Commands for searching SENT serial decode events.
:SYSTem:PERSona[:MANufactu
rer] (see page 985)
Lets you change the manufacturer string portion of the
identification string returned by the *IDN? query.
:SYSTem:PERSona[:MANufactu
rer]:DEFault (see page 986)
Sets manufacturer string to "KEYSIGHT TECHNOLOGIES".
Command Description
Command Differences From InfiniiVision 4000 X-Series Oscilloscopes
:ACQuire:MODE (see
page 235)
The ETIMe option is not supported in the 3000T X-Series
oscilloscopes.
:DEMO:FUNCtion (see
page 300)
The DCMotor, HARMonics, COUPling, CFD, and SENT functions
are now available with the DSOXEDK educator's kit license.
:DISPlay:ANNotation<n> (see
page 318)
You can now define up to four annotations.
:DISPlay:ANNotation<n>:BACK
ground (see page 319)
:DISPlay:ANNotation<n>:COLor
(see page 320)
:DISPlay:ANNotation<n>:TEXT
(see page 321)
:DISPlay:SIDebar (see
page 330)
The EVENts and COUNter options are now available.
:DISPlay:VECTors (see
page 332)
Always ON (no display as dots option).
:DVM:MODE (see page 337) The FREQuency option has been replaced by the new
Chapter 11, “:COUNter Commands,” starting on page 287.
:EXTernal:RANGe (see
page 342)
When using 1:1 probe attenuation, the range can only be set to
8.0 V.
:FUNCtion<m>:OPERation (see
page 390)
The SMOoth, ENVelope, MAXHold, and MINHold operations are
added.
:POWer:SIGNals:AUTosetup
(see page 624)
The RDSVce option is now available.
:SBUS<n>:CAN:COUNt:OVERlo
ad (see page 723)
Always returns zero.
To Next Page
Loading...
Need help?
General
