Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 85
:FUNCtion<m>:BUS:SLOP
e <slope> (see
page 372)
:FUNCtion<m>:BUS:SLOP
e? (see page 372)
<slope> ::= {NEGative | POSitive
| EITHer}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:YINC
rement <value> (see
page 373)
:FUNCtion<m>:BUS:YINC
rement? (see page 373)
<value> ::= value per bus code,
in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:YORi
gin <value> (see
page 374)
:FUNCtion<m>:BUS:YORi
gin? (see page 374)
<value> ::= value at bus code =
0, in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:YUNi
ts <units> (see
page 375)
:FUNCtion<m>:BUS:YUNi
ts? (see page 375)
<units> ::= {VOLT | AMPere |
NONE}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:CLEar
(see page 376)
n/a n/a
:FUNCtion<m>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 377)
:FUNCtion<m>:DISPlay?
(see page 377)
{0 | 1}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:CE
NTer <frequency> (see
page 378)
:FUNCtion<m>[:FFT]:CE
NTer? (see page 378)
<frequency> ::= the current
center frequency in NR3 format.
The range of legal values is from
0 Hz to 25 GHz.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FFT:FREQ
uency:STARt
<frequency> (see
page 379)
:FUNCtion<m>:FFT:FREQ
uency:STARt? (see
page 379)
<frequency> ::= the start
frequency in NR3 format.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FFT:FREQ
uency:STOP
<frequency> (see
page 380)
:FUNCtion<m>:FFT:FREQ
uency:STOP? (see
page 380)
<frequency> ::= the stop
frequency in NR3 format.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:SP
AN <span> (see
page 381)
:FUNCtion<m>[:FFT]:SP
AN? (see page 381)
<span> ::= the current frequency
span in NR3 format.
Legal values are 1 Hz to 100 GHz.
<m> ::= 1 to (# math functions)
in NR1 format
Table 15 :FUNCtion<m> Commands Summary (continued)
Command Query Options and Query Returns
To Next Page
Loading...
