SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
143
Functions specific to SCALANCE
This part contains the sections that describe functions specific to SCALANCE.
The C-PLUG or KEY-PLUG stores the configuration of a device and can therefore transfer
the configuration of the old device to the new device when a device is replaced.
In addition to the configuration, the KEY-PLUG also contains a license that enables the use
of certain functions.
This section describes commands relevant for working with the C-PLUG or KEY-PLUG.
This section describes commands with which you display various settings.
This command shows the current information of the PLUG.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show plug
The current information of the PLUG is diplayed.
To Next Page
Loading...
Need help?
General