Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.1 User management
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
815
11.1.4.9
no user-group
Description
With this command, you delete the link between a group and a role.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no user-group <user-group-name>
The parameter has the following meaning:
Parameter
Description
Range of values / note
user-group-name
Group name
Enter the name of a group.
Result
The link is deleted.
Further notes
You link a group with a role with the user-group command.
You show the created links with the
show user-groups command.
11.1.4.10
username
Description
With this command, you change the password of the factory set default user "admin".
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English