Siemens SCALANCE XM-400 - Show Sntp Broadcast-Mode Status; Show Sntp Unicast-Mode Status

System time
5.3 SNTP Client
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
166 Configuration Manual, 06/2016, C79000-G8976-C252-11
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show sntp status
Result
The settings of SNTP are displayed.
5.3.1.2
show sntp broadcast-mode status
Description
This command shows the current configuration of the broadcast mode of SNTP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show sntp broadcast-mode status
Result
The current SNTP broadcast configuration is displayed.
5.3.1.3
show sntp unicast-mode status
Description
This command shows the current configuration of the unicast mode of SNTP.