Siemens SCALANCE XM-400 - Syslog Client; The Show Commands; Show Events Syslogserver

Diagnostics
12.6 Syslog Client
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
944 Configuration Manual, 06/2016, C79000-G8976-C252-11
The parameter has the following meaning:
Parameter
Description
Range of values / note
index
Number of the recording
1 ... 52
Result
The data recording is ended.
12.6
Syslog Client
With the commands in this section, the following settings are configured:
● Transfer of the messages to the Syslog server
● Local buffering and storage of messages
● Receipt and forwarding of messages from other devices (relay mode)
12.6.1
The "show" commands
This section describes commands with which you display various settings.
12.6.1.1
show events syslogserver
Description
This command shows the entries of the configured Syslog server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events syslogserver
Result
The entries of the configured Syslog server are displayed.