Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
64 Configuration Manual, 06/2016, C79000-G8976-C252-11
Result
The temperature values are displayed.
3.1.1.6
show ethernetip
Description
This command shows the current EtherNet/IP configuration.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ethernetip
Result
The current EtherNet/IP configuration is displayed.
3.1.1.7
show hardware
Description
This command shows the type and number as well as the position of the installed interface
cards of the system.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show hardware

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English