Siemens SCALANCE XM-400 Configuration Manual

SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
801
Security and authentication
11
This part contains the sections that describe the access rights and authentication methods.
11.1
User management
This section describes commands for access as administrator and the configuration of the
authentication methods.
When you transfer the configuration of a device to TIA, the configured users, roles and
groups are not transferred.
11.1.1
The "show" commands
This section describes commands with which you display various settings.
11.1.1.1
show password-policy
Description
This command shows which password policy is currently being used.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show password-policy
Result
The currently valid password policy is displayed.
Further notes
You configure the password policy with the password policy command.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English