Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.1 User management
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
807
Result
The password policy is specified:
Further notes
You assign a new password with the user-account command.
You display the setting with the
show password-policy command.
11.1.4.2
role
Description
With this command, you create roles that are valid locally on the device.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
role <role-name> function-rights <function-rights-value(1-15)> [description <role-
description>]
The parameters have the following meaning:
Parameter
Description
Range of values / note
role-name
Role name Enter a name for the role. The name
must meet the following conditions:
• It must be unique.
• It must be between 1 and 64 charac-
ters long.
function-rights
Keyword for the function rights -
function-rights-
value
Value of the function rights Select the function rights of the role.
• 1
Users with this role can read device
parameters but cannot change them.
• 15
Users with this role can both read and
change device parameters.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English