Siemens SCALANCE XM-400 - Show Roles; Show User-Accounts

Security and authentication
11.1 User management
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
802 Configuration Manual, 06/2016, C79000-G8976-C252-11
11.1.1.2
show roles
Description
This command shows the created roles.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show roles
Result
The created roles are shown.
Further notes
You create a role with the role command.
You delete a role with the
no role command.
11.1.1.3
show user-accounts
Description
This command shows the created users.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
show user-accounts [external]