Siemens SCALANCE XM-400 Configuration Manual

Layer 3 functions
9.4 VRRPv2 (IPv4)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
628 Configuration Manual, 06/2016, C79000-G8976-C252-11
Requirement
● The Router configuration mode is enabed.
● You are in the VRRP Router configuration mode.
The command prompt is:
cli(config-vrrp)#
Syntax
Call the command without parameters:
vrrp virtual-ping
Result
The function for pings to virtual addresses is enabled.
Further notes
You disable the setting with the no vrrp virtual-ping command.
You display the status of this function and other information in Privileged EXEC mode with
the
show vrrp command.
9.4.3.8
no vrrp virtual-ping
Description
With this command, you disable pings to virtual addresses.
Requirement
● The Router configuration mode is enabed.
● You are in the VRRP Router configuration mode.
The command prompt is:
cli(config-vrrp)#
Syntax
Call the command without parameters:
no vrrp virtual-ping
Result
The function for pings to virtual addresses is disabled.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English