Layer 2 management protocols
8.8 MLD Snooping (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
500 Configuration Manual, 06/2016, C79000-G8976-C252-11
Call the command without parameter assignment:
show ipv6 mld snooping globals
The information is displayed.
show ipv6 mld snooping mrouter
Description
This command shows the ports at which IGMP queriers are connected for all or a selected
VLAN..
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Call up the command with the following parameters:
show ipv6 mld snooping mrouter [Vlan <vlan index>] [detail]
The parameters have the following meaning:
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or VLAN range
Specifies that detailed information is displayed.
A list of the active ports is displayed.
show ipv6 mld snooping statistics
Description
This command shows the MLD snooping statistics for all or a selected VLAN.
To Next Page
Loading...
Need help?
General