Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
939
no rmon alarm <number (1-250)>
The parameter has the following meaning:
Parameter
Description
Range of values / note
number
Number of the alarm to be deleted
1 ... 250
Result
The entry for monitoring a MIB variable is deleted.
12.5.2.5
rmon event
Description
With this command, you configure an event in the RMON Event Table.
You specify its name and the owner and whether or not an SNMP trap is generated.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
rmon event <number(1-500)>[description<event-description(127)>]
[owner<ownername(127)>][trap<notify(127)>]
The parameters have the following meaning:
Parameter
Description
Range of values / note
number
Number of the event 1 ... 500
description
Title of the event
-
event-description
Description of the event max. 127 characters
owner
User to which the event is assigned
-
ownername
User name of the user
max. 127 characters
trap
Specifies whether an SNMP trap
should be sent
-
notify
Name of the community to which the
SNMP trap will be sent
max. 127 characters

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English