Siemens SCALANCE XM-400 - No Ip Igmp Vlan-Snooping; Ip Igmp Snooping Clear Counters

Layer 2 management protocols
8.3 IGMP snooping
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
463
Syntax
Call the command without parameters:
ip igmp vlan-snooping
Result
IGMP snooping is enabled for all VLANs.
Further notes
You disable IGMP snooping with the no ip igmp vlan-snooping command.
8.3.2.3
no ip igmp vlan-snooping
Description
With this command, you disable IGMP snooping for all VLANs.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip igmp vlan-snooping
Result
IGMP snooping is disabled for all VLANs.
Further notes
You enable IGMP snooping with the ip igmp vlan-snooping command.
8.3.2.4
ip igmp snooping clear counters
Description
With this command, you delete the counters for all or a selected VLAN.