Siemens SCALANCE XM-400 - The Show Commands; Show Ip Pim Rp-Hash

Layer 3 functions
9.10 PIM (IPv4)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
753
Between the sender and recipient the shortest path is selected based on the routing table
and the information can be sent.
In this example the source sends a multicast to the connected router. The router sends this
information to the rendezvous point.
The recipient sends an IGPM Join to its IGMP querier and designated router. The DR
forwards the request to the RP.
Based on the routing table, the shortest path is selected for the multicast.
9.10.1
The "show" commands
This section describes commands with which you display various settings.
9.10.1.1
show ip pim rp-hash
Description
With this command, you display the rendezvous point (RP) of a multicast group.