Siemens SCALANCE XM-400 Configuration Manual

Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
941
Commands relating to other topics that can be called in the interface configuration mode can
be found in the relevant sections.
● If you exit the Interface configuration mode with the
exit command, you return to the
Global configuration mode.
● If you exit the Interface configuration mode with the
end command, you return to the
Privileged EXEC mode.
12.5.3.1
rmon collection stats
Description
With this command, you start the recording of statistical data of an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
rmon collection stats <index (1-52)>[owner<ownername(127)>]
The parameters have the following meaning:
Parameter
Description
Range of values / note
index
Number of the recording
1 ... 52
owner
User to which the event is assigned
-
ownername
User name of the user
max. 127 characters
Result
The recording of statistical data is started.
Further notes
You can display the content of a recording with the show rmon statistics command.
12.5.3.2
no rmon collection stats
Description
With this command, you end the recording of statistical data of an interface.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English