Siemens SCALANCE XM-400 - Ipv6 Mld Snooping Version

Layer 2 management protocols
8.8 MLD Snooping (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
509
Further notes
You can display the status of this function and other information with the show ipv6 mld
snooping
command.
8.8.3.4
ipv6 mld snooping version
Description
This command specifies which version of MLD the device will use in this VLAN.
Requirement
You are in the VLAN configuration mode.
The command prompt is as follows:
cli(config-vlan-$$$)#
Syntax
Call up the command with the following parameters:
ipv6 mld snooping version {v1 | v2}
The parameters have the following meaning:
Parameter
Description
v1
MLDv1
v2
MLDv2
Default
Result
The version of MLD used by the device in this VLAN is specified.