Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.12 ARP
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
423
7.11.1.2
show ssl server-cert
Description
This command shows the SSL server certificate.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ssl server-cert
Result
The SSL server certificate is displayed.
7.12
ARP
This section describes commands of the Address Resolution Protocol (ARP).
7.12.1
The "show" commands
This section describes commands with which you display various settings.
7.12.1.1
show ip arp
Description
With this command, you display the IP ARP table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English