Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.2 RADIUS client
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
817
11.2
RADIUS client
RADIUS (Remote Authentication Dial-In User Service) is a client/server protocol that allows
the centralized logging in of users logging on in a physical or virtual network. This makes
central administration of user data possible.
This section describes commands relevant for the configuration of this service.
11.2.1
The "show" commands
This section describes commands with which you display various settings.
11.2.1.1
show radius statistics
Description
This command shows the connection statistics from the RADIUS client to the RADIUS
server.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
show radius statistics
Result
The connection statistics are displayed.
11.2.1.2
show radius server
Description
This command shows the RADIUS server configuration.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English