Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.11 HTTPS server
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
422 Configuration Manual, 06/2016, C79000-G8976-C252-11
Result
HTTP is disabled on the device.
Further notes
You can display the setting of this function and other information with the show ip http
server status
command.
You enable HTTP with the
ip http command.
7.11
HTTPS server
This section describes commands of the Hypertext Transfer Protocol Secure (HTTPS).
7.11.1
The "show" commands
This section describes commands with which you display various settings.
7.11.1.1
show ip http secure server status
Description
This command shows the status of the HTTPS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip http secure server status
Result
The status, cipher suite and version of the HTTPS server are displayed.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English