Siemens SCALANCE XM-400 Configuration Manual

Network protocols
7.2 IPv6 protocol
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
308 Configuration Manual, 06/2016, C79000-G8976-C252-11
7.2.2.3
show ipv6 route
Description
This command shows the routes currently being used.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show ipv6 route
Result
The IPv6 routing table is displayed.
Further notes
You configure a static entry with the ipv6 route command.
7.2.2.4
show ipv6 route summary
Description
This command shows a summary of the IPv6 routes.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show ipv6 route summary

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English