Siemens SCALANCE XM-400 - Show Cli-Console-Timeout; Show Coordinates

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
62 Configuration Manual, 06/2016, C79000-G8976-C252-11
Result
The broadcast blocking settings for ports are displayed.
3.1.1.2
show cli-console-timeout
Description
This command shows the global configuration for the timeout of the CLI console.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show cli-console-timeout
Result
The configuration for the timeout is displayed.
3.1.1.3
show coordinates
Description
This command shows the system coordinates.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show coordinates