Siemens SCALANCE XM-400 Configuration Manual

Network structures
6.1 VLAN
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
189
Result
The information about the ports is displayed.
6.1.1.12
show vlan private-vlan
Description
This command shows the specific information for all or for a selected private VLAN type.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show vlan private-vlan [pvlan-type]
The parameter has the following meaning:
Parameter
Description
Range of values / note
pvlan-type
Shows brief information about all
VLANs
primary
isolated
community
If you do not select any parameter from the parameter list, the entries of all available types
are displayed.
Result
The information for the selected private VLAN type is displayed.
Further notes
You define a private VLAN type private-vlan command.
6.1.1.13
show vlan protocols-group
Description
This command displays the table with the protocol group entries.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English