Siemens SCALANCE XM-400 Configuration Manual

Description
2.3 Configuration limits
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
37
2.3
Configuration limits
Configuration limits of the device
The following table lists the configuration limits for Web Based Management and the
Command Line Interface of the device.
The usability of various functions depends on the device type you are using and whether or
not a KEY-PLUG is inserted.
Configurable function
Maximum number
System
DNS server
3
Syslog server 3
E-mail server
3
SNMPv1 trap recipient 10
SNTP server
2
NTP server
3
DHCP pools
24
IPv4 addresses managed by the DHCP server (dynamic +
static)
575
Relay agent information for DHCP
5
DHCP static assignments per DHCP pool
24
Layer 2
Virtual LANs (port-based; including VLAN 1)
257
Protocol-based VLAN groups
12
Protocol-based VLAN groups per port
12
IPv4 subnet-based VLANs
150
Private VLAN
1
Primary PVLANs
1
Secondary isolated PVLANs
24
Secondary community PVLANs
256
Multiple Spanning Tree instances
16
Link aggregations or Etherchannels each with a maximum of 8
ports per aggregation
8
Ports in a link aggregation 8
Static MAC addresses in the Forward Database (FDB)
256
Multicast addresses without active GMRP 512
Multicast addresses with active GMRP
50
VLANs whose data traffic can be mirrored to a monitor port
255
RSPAN sessions
1
Layer 3
IP interfaces
127
Entries in the hardware routing table
4096
Static routes
100
Possible routes to the same destination
8
DHCP Relay Agent interfaces
127
DHCP Relay Agent server
4

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English