Siemens SCALANCE XM-400 - Page 153

Functions specific to SCALANCE
4.4 Signaling contact
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
153
Syntax
Call up the command with the following parameters:
signaling-contact status {open|close}
The parameters have the following meaning:
Parameter
Description
open
Signaling contact is opened.
close
Signaling contact is closed.
Result
The signaling contact is opened or closed.
Further notes
You display the setting with the show signaling contact command.