Layer 3 functions
9.3 OSPFv3 (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
616 Configuration Manual, 06/2016, C79000-G8976-C252-11
Call the command without parameter assignment:
no ipv6 ospf transmit-delay
The interval is reset.
You enable OSPFv3 routing with the ipv6 router ospf command.
You configure the interval with the
ipv6 ospf transmit-delay command.
You enable OSPFv3 routing with the
ipv6 router ospf command.
To Next Page
Loading...
