Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.1 User management
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
812 Configuration Manual, 06/2016, C79000-G8976-C252-11
associated role. If the corresponding group is known on the device, both tables are
evaluated. The user is assigned the role with the higher rights.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
user-account-ext <user-name-ext> role <user-role-ext> [description <user-ext-
description>]
The parameters have the following meaning:
Parameter
Description
Range of values / note
user-account-ext
Keyword for a user in the table
"External User Accounts"
-
user-name-ext
User name Enter the name for the user. The name
must meet the following conditions:
• It must be unique.
• It must be between 1 and 250 charac-
ters long.
role
Keyword for the role name
-
user-role-ext
Role name Enter a role.
You can choose between system-defined
and self-defined roles.
description
Keyword for the description
-
user-ext-
description
Content of the description Enter a description for the user in the
table "External User Accounts". The de-
scription text can be up to 100 characters
long.
Result
A link in the table "External User Accounts" has been created.
Note
User name cannot be changed
After cr
eating a user, the user name can no longer be modified. If a user name needs to be
changed, the user must be deleted and a new user created.

Siemens SCALANCE XM-400 Specifications

General

Brand	Siemens
Model	SCALANCE XM-400
Category	Switch
Language	English