Enterasys C3G124-24 - Page 626

show ip route
25-20 IP Configuration
Defaults
If no parameters are specified, all IP route information will be displayed.
Mode
Any router mode.
Usage
The routing table contains all active static routes, all the RIP routes, and up to three best OSPF
routes learned for each network.
Example
This example shows how to use the show ip route command to display all IP route information. A
portion of the output is shown:
C3(su)->router#show ip route
Codes: C - connected, S - static, R - RIP, O - OSPF, IA - OSPF interarea
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
E - EGP, i - IS-IS, L1 - IS-IS level-1, LS - IS-IS level-2
* - candidate default, U - per user static route
IA 1.255.255.248/29 [10/30] via 168.0.0.249, Vlan 3205
O 2.0.0.0/10 [8/30] via 168.1.0.254, Vlan 1200
O 2.224.0.0/11 [8/30] via 168.1.0.254, Vlan 1200
C 7.15.0.0/24 [0/0] directly connected, Vlan 715
O 11.11.12.12/32 [8/30] via 168.0.0.249, Vlan 3205
O 11.11.13.13/32 [8/10] via 168.1.0.249, Vlan 1300
O 11.11.16.16/32 [8/20] via 168.0.0.249, Vlan 3205
E2 11.11.17.17/32 [150/20] via 168.0.0.249, Vlan 3205
IA 11.11.21.21/32 [10/30] via 168.0.0.249, Vlan 3205
IA 11.11.22.22/32 [10/30] via 168.0.0.249, Vlan 3205
E2 11.11.24.24/32 [150/20] via 168.0.0.249, Vlan 3205
O 11.11.25.25/32 [8/20] via 168.0.0.249, Vlan 3205
C 11.11.26.26/32 [0/0] directly connected, Loopback 0
O 11.11.27.27/32 [8/10] via 168.1.0.254, Vlan 1200
O 11.11.28.28/32 [8/20] via 168.1.0.254, Vlan 1200
E2 12.0.0.0/17 [150/20] via 168.0.0.249, Vlan 3205
E2 19.0.0.0/30 [150/20] via 168.0.0.249, Vlan 3205
IA 20.0.0.0/24 [10/40] via 168.0.0.249, Vlan 3205
E2 22.22.0.0/16 [150/20] via 168.0.0.249, Vlan 3205
E2 22.22.10.0/24 [150/20] via 168.0.0.249, Vlan 3205
E2 22.22.12.0/24 [150/20] via 168.0.0.249, Vlan 3205
O 22.22.13.0/24 [8/30] via 168.1.0.254, Vlan 1200
E2 22.22.14.0/24 [150/20] via 168.0.0.249, Vlan 3205
O 22.22.15.0/24 [8/20] via 168.1.0.249, Vlan 1300 via 168.1.0.254, Vlan 1200
E2 22.22.16.0/24 [150/20] via 168.0.0.249, Vlan 3205
E2 22.22.17.0/24 [150/20] via 168.0.0.249, Vlan 3205
O 22.22.18.0/24 [8/30] via 168.1.0.254, Vlan 1200
O 22.22.19.0/24 [8/20] via 168.1.0.249, Vlan 1300 via 168.1.0.254, Vlan 1200
IA 22.22.20.0/24 [10/40] via 168.0.0.249, Vlan 3205
rip (Optional) Displays routes configured for the RIP routing protocol. For
details on configuring RIP, refer to “Configuring RIP” on page 26-1.
static (Optional) Displays static routes.
summary (Optional) Displays a summary of the IP routing table.