clear ipv6 statistics
29-34 IPv6 Configuration
Parameters
Defaults
If no interface is specified, statistics are cleared (reset to 0) for all interfaces.
Mode
Router privileged executionC3(su)->router#
Usage
IPv6 statistics are displayed with the show ipv6 traffic command. If no interface is specified, the
counters for all IPv6 traffic statistics are reset to zero when this command is executed.
Example
This example clears the statistics for VLAN 6.
C3(su)->router# clear ipv6 statistics vlan 6
interface (Optional) Specifies the interface for statistics should be cleared.
Interface can be of the form:
vlan vlan-id
tunnel tunnel-id
loopback loop-id
To Next Page
Loading...
Need help?
General