area virtual-link transmit-delay
Enterasys C3 Configuration Guide 31-21
Defaults
The default transmit delay is 1 second.
Mode
Router OSPFv3 configuration: C3(su)->router(Config-router)#
Usage
Use the no form of this command to reset the transmit delay to the default of 1 second.
Example
This example sets the transmit delay to 2 seconds for the specified OSPFv3 virtual interface.
C3(su)->router(Config-router)# area 20 virtual-link 2.2.2.2 transmit-delay 2
To Next Page
Loading...
