clear eapol
32-28 Authentication and Authorization Configuration
Parameters
Defaults
If auth-mode is not specified, all EAPOL settings will be cleared.
If port-string is not specified, settings will be cleared for all ports.
Mode
Switch command, read-write.
Example
This example shows how to clear the EAPOL authentication mode for port ge.1.3:
C3(su)->clear eapol auth-mode ge.1.3
auth-mode (Optional) Globally clears the EAPOL authentication mode.
port-string Specifies the port(s) on which to clear EAPOL parameters. For a detailed
description of possible port-string values, refer to “Port String Syntax Used
in the CLI” on page 11-1.
To Next Page
Loading...
