Siemens SCALANCE XM-400 - Page 124

Configuration
3.4 Configuration Save & Restore
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
124 Configuration Manual, 06/2016, C79000-G8976-C252-11
Parameter
Description
Range of values / note
dot1x
shows the configuration settings of the
port-based network access control
-
vlan
Keyword for a VLAN connection -
vlan-id
Number of the addressed VLAN
1 ... 4094
interface
Keyword for a an interface description -
port-channel
Keyword for a port channel connection
-
port-channel-id
Number of the addressed port channel
1 … 8
interface-type
Type of interface
Enter a valid interface.
interface-list
Module no. and port no. of the interface
ssh
Shows the configuration settings of the
Secure Shell protocol
-
ssl
Shows the configuration settings of the
Secure Sockets Layer protocol
-
acl
Shows the configuration settings of the
access control lists
-
ip
Shows the configuration settings of the
Internet Protocol
-
snmp
Shows the configuration settings of the
Simple Network Management Protocol
-
radius
shows the configuration settings of the
Remote Authentication Dial-In User
service
-
rmon
Shows the configuration settings of the
Remote Monitoring function
-
igmp
Shows the configuration settings of the
Internet Group Management Protocol
-
sntp
Shows the configuration settings of the
Simple Network Time Protocol
-
http
Shows the configuration settings of the
Hypertext Transfer Protocol
-
broadcast-blocking
Shows the configuration settings of the
broadcast blocking
-
multicast-blocking
Shows the configuration settings of the
multicast blocking
-
locked-port
Shows the configuration settings of the
locked port function
-
auto-logout
Shows the configuration settings of the
auto logout function
-
time
Shows the configuration settings of the
system time
-
ntp
Shows the configuration settings of the
Network Time Protocol
-
auto-save
Shows the configuration settings of the
auto save function
-
panel-button
Shows the configuration settings of the
Panel Button function
-