Huawei Quidway S8500 Series - Ftp Timeout; Local-User

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-24
1.3.5 ftp timeout
Syntax
ftp timeout minute
undo ftp timeout
View
System view
Parameter
minute: Connection timeouts (measured in minutes), ranging from 1 to 35791; By
default, the connection timeout time is 30 minutes.
Description
Use the ftp timeout command to configure connection timeout interval.
Use the undo ftp timeout command to restore the default connection timeout interval.
After a user logs on to an FTP Server and has established connection, if the connection
is interrupted or cut abnormally by the user, FTP Server will still hold the connection.
The connection timeout can avoid this problem. If the FTP server has no command
interaction with a client for a specific period of time, it considers the connection to be
failed and disconnect to the client.
Example
# Set the connection timeout to 36 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ftp timeout 36
1.3.6 local-user
Syntax
local-user { username | multicast [ domain domain-name ] ipaddress |
password-display-mode { auto | cipher-force } }
undo local-user { username | all [ service-type { ftp | lan-access | telnet | ppp | ssh
| terminal } ] | multicast [ domain domain-name ] ipaddress |
password-display-mode }
View
System view