Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-1
Chapter 5 BGP Configuration Commands
 Note:
When a switch runs a routing protocol, it can perform the router functions. A router that
is referred to in the following or its icon represents a generalized router or an S8500
series routing switch running routing protocols. To improve readability, this will not be
described in the other parts of the manual.
For the configuration of VPN instance, refer to the MPLS module in Quidway S8500
Series Routing Switches Operation Manual.
5.1 BGP Configuration Commands
5.1.1 aggregate
Syntax
aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
undo aggregate address mask [ as-set | attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name | suppress-policy
route-policy-name ]*
View
BGP view
Parameter
address: Address of the aggregated route in dotted decimal format.
mask: Network mask of the aggregated route in dotted decimal format.
as-set: Creates a route with segment of AS_SET.
detail-suppressed: Only advertises the aggregated route.
suppress-policy route-policy-name: Suppresses the specific route selected and does
not advertise part of the specific routes.
origin-policy route-policy-name: Selects the originate routes used for aggregation.
attribute-policy route-policy-name: Sets the attributes of the aggregated route.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English