Huawei Quidway S8500 Series - Display Msdp Peer-Status

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 6 MSDP Configuration Commands
Huawei Technologies Proprietary
6-3
Example
# Display the state of MSDP peer.
<Quidway> display msdp brief
MSDP Peer Brief Information
Peer's Address State Up/Down time AS SA Count Reset Count
20.20.20.20 Up 00:00:13 100 0 0
6.1.4 display msdp peer-status
Syntax
display msdp peer-status [ peer-address ]
View
Any view
Parameter
peer-address: Address of MSDP peer.
Description
Use the display msdp peer-status command to view the detailed information of
MSDP peer.
Related command: peer.
Example
# Display the detailed information of the MSDP peer 10.110.11.11.
<Quidway> display msdp peer-status 10.110.11.11
MSDP Peer 20.20.20.20, AS 100
Description:
Information about connection status:
State: Up
Up/down time: 14:41:08
Resets: 0
Connection interface: LoopBack0 (20.20.20.30)
Number of sent/received messages: 867/947
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none