Huawei Quidway S8500 Series User Manual

Command Manual – Getting Started
Quidway S8500 Series Routing Switches Chapter 2
Password Control Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 Password Control Configuration
Commands
2.1 Password Control Configuration Commands
2.1.1 display password-control
Syntax
display password-control
View
Any view
Parameter
None
Description
The display password-control command is used to view the password control
information for all users, including the enabled/disabled state of password aging, the
aging time, the enabled/disabled state of the minimum password length limitation and
the configured minimum password length, the enabled/disabled state of history
password recording, the alert time before password expiration, the timeout time for
password authentication, the maximum number of password input attempts, the
maximum number of history password records, the processing mode after failed
password input attempts, the time when the password history was last cleared, and so
on
Example
# Display the information about the current password control for all users.
<Quidway> display password-control
Global password settings for all users:
Password aging: Disabled
Password length: Disabled
Password history: Disabled
Password alert-before-expire : 7 days
Password authentication-timeout : 60 seconds
Password attempt times : 3 times
Password attempt-failed action : Lock for 120 minutes

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English