Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-21
[Quidway-bgp] peer 10.1.1.1 group TEST
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer TEST enable
[Quidway-bgp-af-mul] peer 10.1.1.1 group TEST
7.1.30 peer ip-prefix export
Syntax
peer group-name ip-prefix prefixname export
undo peer group-name ip-prefix prefixname export
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of peer group.
prefixname: Name of the specified ip-prefix.
Description
Use the peer ip-prefix export command to configure the route filtering policy of routes
advertised by the peer group based on the ip-prefix.
Use the undo peer ip-prefix export command to cancel the route filtering policy of the
peer/peer group based on the ip-prefix.
By default, the route filtering policy of the peer group is not specified.
The peer ip-prefix export command can only be configured on the peer groups.
Related command: ip ip-prefix, peer ip-prefix import.
Example
# Configure the route filtering policy of the peer group1 based on the ip-prefix list1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer group1 ip-prefix list1 export
7.1.31 peer ip-prefix import
Syntax
peer { group-name | peer-address } ip-prefix prefixname import
undo peer { group-name | peer-address } ip-prefix prefixname import
To Next Page
Loading...
