Huawei Quidway S8500 Series - Chapter 2 HA Configuration Commands; Debugging Ha

Command Manual – Reliability
Quidway S8500 Series Routing Switches Chapter 2
HA Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 HA Configuration Commands
2.1 HA Configuration Commands
2.1.1 debugging ha
Syntax
debugging ha { all | event | message | state }
undo debugging ha { all | event | message | state }
View
User view
Parameter
all: All HA debugging switches.
event: HA batch backup or tamed event debugging switch.
message: Debugging sswitch for messages received or sent by HA.
state: HA state machine state information debugging switch.
Description
Use the debugging ha command to enable HA debugging.
Use the undo debugging ha command to disable HA debugging.
By default, HA debugging is disabled.
Example
# Enable all the HA debugging.
<Quidway> debugging ha all
2.1.2 display switchover state
Syntax
display switchover state [ slot-id ]
View
Any view
Parameter
slot-id: Slot number of master or slave board.