Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 6 MSDP Configuration Commands
Huawei Technologies Proprietary
6-7
Parameter
None
Description
Use the msdp command to enable MSDP and enter the MSDP view.
Use the undo msdp command to clear all configurations of MSDP, release all
resources that MSDP occupies, and restore the initial state.
Related command: peer.
Example
# Clear all configurations of MSDP.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo msdp
6.1.9 msdp-tracert
Syntax
msdp-tracert source-address group-address rp-address [ max-hops max-hops |
next-hop-info | sa-info | peer-info | skip-hops skip-hops ]*
View
Any view
Parameter
source-address: Multicast source address.
group-address: Multicast group address.
rp-address: IP address of RP.
max-hops: The maximum number of hops that are traced, ranging from 1 to 255. By
default, the value is 16.
next-hop-info: Flag bit for collecting the next hop information.
sa-info: Flag bit for collecting SA entity information.
peer-info: Flag bit for collecting MSDP peer information.
skip-hops: Number of hops that are skipped before collecting detailed information,
ranging from 0 to 255. By default, the value is 0.
Description
Use the msdp-tracert command to trace the transmission path of SA messages in the
network, which helps to locate the faults such as information loss and configuration

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English