Huawei Quidway S8500 Series User Manual

Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 1
VLAN Configuration Commands
Huawei Technologies Proprietary
1-6
Parameter
None
Description
Use the shutdown command to disable the VLAN interface.
Use the undo shutdown command to enable the VLAN interface.
By default, when all the Ethernet ports in a VLAN are in the Down state, this VLAN
interface is also Down. When there are one or more Ethernet ports in the Up state, this
VLAN interface is also Up.
This command can be used to start interface after the related parameters and protocols
of VLAN interface are set. Or when the VLAN interface fails, the interface can be shut
down first and then restarted. In this way, the interface may be restored to normal
status.
Shutting down or bringing up a VLAN interface will not affect any Ethernet port of this
VLAN.
Example
# Shut down Vlan-interface 2.
[Quidway-Vlan-interface1] shutdown
1.1.8 trap-to-cpu disable
Syntax
trap-to-cpu disable
undo trap-to-cpu disable
View
VLAN view
Parameter
None
Description
Use the trap-to-cpu disable command to move the CPU port out of a VLAN.
Use the undo trap-to-cpu disable command to move the CPU port into a VLAN.
By default, a VLAN contains a CPU port.
Example
# Move the CPU port out of VLAN 2.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English